Terminal tackle is the hardware at the end of your line — the parts that present the bait and tell you when a fish is there. South Carolina Department of Natural Resources (DNR), in A Beginner's Guide to Fishing, groups "Basic Fishing Tackle or Terminal Tackle" as hooks, sinkers, bobbers (also called corks or floats), and snap swivels.
The job of this kit is simple: the hook has to be a size the fish can take; the sinker has to put the bait where you want it, or help you cast; the bobber has to hold that depth and show a bite; a swivel has to connect pieces and, on a snap, let you change a lure without cutting the line. None of those jobs is the rod, the reel, or the line — those have their own live guides: How to Choose a Fishing Rod, How to Choose a Fishing Reel, How to Choose a Rod and Reel Combo, and How to Choose Fishing Line. Tie the hook on with a knot from Essential Knots. This page does not teach knots.
Quick answer (our summary): Start with a hook in a size an agency names for the fish you want — NY DEC's starter for panfish and trout is a #6 or #8; Arkansas Game and Fish publishes its own ranges by species, and says "When in doubt, choose the smaller size hook." Add a bobber if you want to see the bite; NY DEC calls a bobber-and-bait setup "the best rig for beginners." A split-shot sinker is optional on that rig (NY DEC) and is the weight South Carolina DNR uses on a simple bottom rig. Check your state's current rules on lead sinkers and jigs before you buy or use weight — rules differ, and the examples on this page are not a complete list. Fishing by State.
This page teaches you what each of those pieces is, how to choose it, why the choice matters, and three simple rigs you can tie today. For a single matched rod, reel and line, see Your First Rod, Reel & Line. For the tools that cut line, take out a hook, and measure a fish, see How to Choose Essential Tools. Check license and water rules first: Fishing by State.
Hooks — what they are, and how to choose a size
Our plain-English explanation: a hook is the piece that holds the bait and, when a fish takes it, holds the fish. The first choice is size. Style comes second.
How the numbers work. Several agencies describe the same direction, in their own words. North Dakota Game and Fish: "The sizing starts in the middle at size 1 and works its way out. Smaller hooks size from 1-30 with 30 being the smallest and larger hooks size from 1/0 - 27/0, pronounced '27 aughts.'" Arkansas Game and Fish Commission (AGFC): "Hooks are sized using a numerical form, with larger numbers meaning smaller hook size. A number 12 hook is much smaller than a number 2 hook of the same style." If the size includes a "/0" — "pronounced 'aught' and standing for zero" — "the hook size is getting larger as the first number increases. A 12/0 is much larger than a 2/0." South Carolina DNR says the same direction: "For hook sizes 32 to 1, the larger the number the smaller the hook. For hook sizes from 1/0 (called one aught) to 19/0 the larger the number the larger the hook size." Those ranges are each agency's own; we do not combine them into one official chart, and we do not convert them into inches or millimeters.
Why it matters: the number is not decoration. AGFC: "When choosing hook size, think about the size of fish that are being pursued." "When in doubt, choose the smaller size hook to ensure the fish can take it into its mouth." A hook that is too large for the mouth will not get eaten; that is the practical job of the size choice.
Starter sizes agencies name — credited separately, not combined into one rule.
- NY DEC, I FISH NY freshwater basics: "For panfish and trout, use a number #6 or #8 hook."
- AGFC, for popular species: "Bream/bluegills — no. 4 to no. 8 size hooks"; "Crappie — no. 2 to no. 6 size hooks"; "Bass — no. 2 to 4/0 size hooks"; "Catfish — no. 1 to 6/0 size hooks, depending on size of fish being targeted."
Use the agency's range for the fish you have in mind, then "when in doubt, choose the smaller size" (AGFC). Those are starting points, not a command to put a 4/0 hook on a panfish rod.
Styles. There are many hook shapes. South Carolina DNR lists popular styles (treble, Kirby, octopus, wide gap, baitholder, circle, weedless, and others). For a first box, North Dakota names two everyday bait hooks and says what each is for:
- Octopus hook: "The most standard and versatile hook, easy for baiting worms, leeches or minnows for a simple and natural presentation. Use with a bobber rig for many fish species."
- Aberdeen: "Another basic and versatile hook with a longer and straighter shank than the octopus hook and often made of lighter wire. Can still be paired with a bobber."
Louisiana Department of Wildlife and Fisheries (LDWF), on its "Get Out and Fish" catfish list, calls circle hooks "Best hook type for catfish, helps avoid hook swallowing," and names "2/0-3/0 size will work for most brands." That is Louisiana's catfish advice, not a general rule for every species. We do not stretch it past catfish.
AGFC also distinguishes thin-wire hooks from thicker wire: "Thin-wire hooks are better for smaller fish and quick hooksets with less force. Crappie, bream and trout are examples of fish that lend themselves to the light-wire hooks."
Sharp, and the barb. Texas A&M AgriLife Extension, Fish Texas: A Basic Guide for the Beginning Angler: "Hooks come in an assortment of sizes and styles and must be kept sharp to be effective. If you plan to release your catch, bend down the barb to make it easier to remove the hook." MassWildlife, in "10 Tips for Taking Kids Fishing": "Consider using barbless hooks or using needle nose pliers to bend down barbs on your hooks." Texas Parks and Wildlife Department (TPWD), in its catch-and-release tips, also says "Consider using barbless hooks." Those are each agency's own words. A hook remover and pliers belong in the bag — see How to Choose Essential Tools.

Sinkers — what they are, how to choose one, and lead rules
Texas A&M AgriLife: "Sinkers are weights used to cast your bait, take bait to the bottom, hold bait in place, or keep your bobber upright." That is the job. The shape and the amount of weight are how you do that job in the water in front of you.
Shapes. South Carolina DNR lists "Popular sinker types: bank, pyramid, split shot, egg, bell and bullet." North Dakota describes how some of those are used: "Pair size 1-5 (1/8-1/16 oz) split shot with a hook on your bobber rig and/or use a ¼ - 1 oz egg or dipsey sinker with a slip rig." "No roll sinkers can be ideal for rivers because they're flat and less likely to roll in the current than egg, dipsey or bank sinkers." North Dakota also notes that "Depth, current, wind conditions and its intended use can all influence the weight you'll want/need. Having a variety of sizes will help you adjust as needed." We do not turn North Dakota's example sizes into a universal shopping list, and we do not invent counts.
How to choose, in practice: use the smallest amount of weight that does the job Texas A&M names — enough to cast, to reach the bottom, to hold, or to stand a bobber up — and go heavier only if wind, current, or depth requires it (North Dakota's factors). On a bobber rig, NY DEC says a split-shot "is optional and should only be used if necessary to improve casting or keep your bait down."
How far above the hook. Agencies do not give one distance. Texas A&M: "In many cases, you will place your sinker 4 to 8 inches above your hook to allow live bait to look natural to the fish." The U.S. Fish and Wildlife Service (USFWS), in "A Guide to Fishing for the First Time": "Attach 1 or 2 sinkers, 6 to 12 inches above the hook. This weight will keep your bait or lure down in the water and will help swing it away from shore." Those ranges overlap but are not the same. Our summary: start inside one of those published ranges, then adjust so the bait can still move. We do not pick a single official number.
Lead, lead-free options, and where states regulate lead
Some states restrict the sale or use of lead sinkers and, in some cases, lead jigs. The rules are not the same: some restrict sale, some restrict use, the weight and length cutoffs differ, and some rules apply only on inland waters. The examples below are each taken from that state's own current official page or official 2026 regulations, fetched November 13, 2026 PT. This is not a complete list. Other states, and some individual waters, have their own rules. Always check the current regulations for your state and the water you will fish. Fishing by State.
- New York. The Department of Environmental Conservation (DEC), "Being a Responsible Angler": "DEC has restricted the sale of lead fishing sinkers (including 'split shot') weighing one-half ounce or less to help protect wildlife." (Environmental Conservation Law § 11-0308: "No person shall sell at retail or offer for retail sale lead fishing sinkers weighing one-half ounce or less." The "including split shot" wording is DEC's, on "Being a Responsible Angler.") That is a sale restriction as DEC states it, not a statewide use ban, and we do not call it one. DEC also recommends switching to "non-toxic sinkers" on your next purchase, because lost sinkers, "especially split shot, may be mistaken for food by waterbirds such as ducks, geese, swans, gulls, or loons."
- Maine. The Department of Inland Fisheries and Wildlife (IFW): "It is unlawful to use, sell, or offer for sale lead sinkers and unpainted lead jigs measuring 2.5 inches or less in length or weighing one ounce or less." "It is unlawful to sell or offer for sale painted lead jigs measuring 2.5 inches or less in length or weighing 1 ounce or less." "Sale restrictions are statewide; use restrictions only apply in inland waters." Maine's statute, Title 12, §12664(2)(A-2) (page data extracted October 5, 2026), says: "Beginning September 1, 2026, a person may not use a lead sinker or lead jig that: (1) Weighs one ounce or less; or (2) Measures 2 1/2 inches or less in length." That date has already passed (today is November 13, 2026). IFW's page, fetched the same day, still describes the painted-jig use rule in future tense ("will be prohibited"); we follow the statute for the current use rule, and we follow IFW for the sale-versus-use and inland-waters scope. The matching sale rule is Title 12, §12663-B: a person may not sell or offer for sale a lead sinker or lead jig that weighs one ounce or less or measures 2 1/2 inches or less in length. Maine defines a "lead sinker" and a "lead jig" separately; the sinker definition "does not include … jig heads," and a "lead jig" "means a hook with a lead weight molded to it, regardless of whether it is painted, coated or covered by some other substance or by attached skirts."
- Massachusetts. MassWildlife, Freshwater fishing regulations: "Any sinker or weight made from lead that weighs less than 1 ounce, and any lead jig (meaning any lead-weighted hook) that weighs less than 1 ounce, is prohibited for use in all inland waters of the Commonwealth." The same page says the term lead sinker "shall not include … artificial lures, hooks, weighted flies, and lead-core or other weighted fishing lines." (321 CMR 4.01(4)(i), and the definitions in 321 CMR 4.01(1); enforceable since January 1, 2012.) That is a use prohibition on inland waters, in MassWildlife's words. We do not apply it to other states.
- Vermont. The 2026 Vermont Fishing Guide & Regulations (official state regulations): "It is illegal to sell, offer for sale, or use a lead sinker in Vermont." "'Sinker' means any device that weighs one-half ounce or less and is attached to a fishing line for the purpose of sinking the line, and does not include other lead fishing-related items such as weighted fly line, lead-core fishing line, downrigger cannonballs, weighted flies, lures, spoons, or jig heads." The same official guide, in its lead-and-loons section, restates: "It is illegal to use lead sinkers weighing one-half ounce or less." (10 V.S.A. § 4615, sale, effective January 1, 2006; 10 V.S.A. § 4606(g), use, effective January 1, 2007. Both use the same "sinker" definition, and both exclude jig heads.) We do not read that definition as a statewide jig ban; Vermont's quoted definition of "sinker" excludes jig heads. A different, water-specific rule on the Connecticut River is in the same guide; we do not treat it as the statewide rule.
- Wisconsin — no ban in the page we fetched. Wisconsin DNR, "Fishing & Hunting Lead-Free": "Hunters and anglers have a variety of voluntary options to reduce the risk of unintended lead exposure to wildlife. When choosing your gear, consider lead-free ammunition and tackle — a variety of lead-free options are available." That is voluntary advice, not a prohibition. We do not say Wisconsin bans lead.
Lead-free materials — only as the agency that names them names them. These are not one combined official list, and they are not interchangeable advice:
- Maine IFW: "Tungsten is a popular alterative [Maine's spelling] since it is denser and harder than lead." "Tackle made from tin, bismuth, and steel alloys are lighter than lead." "Any fishing tackle containing zinc is not recommended because it is also toxic to wildlife."
- Vermont's 2026 official guide: "Alternatives to lead sinkers are made of steel, bismuth, tungsten, resin, and glass."
- MassWildlife, on its stocked-trout page (a Massachusetts-specific regulations reminder): "Massachusetts regulations state that all sinkers and jigs less than 1 oz. must be lead-free. Common non-toxic options include brass, steel, tungsten, or tin."
Maine does not recommend zinc; MassWildlife names brass among "common non-toxic options." Those are different agencies. We do not reconcile them into one materials list. If your state restricts lead, buy a sinker that meets that state's current rule, and check the label.

Bobbers — what they are, fixed or slip, and how to size one
A bobber (also a float or a cork) does three jobs. NY DEC:
- "Suspends bait above the bottom, weeds or other cover."
- "Indicates when fish are striking (biting or nibbling)."
- "Provides additional weight when casting."
Texas A&M describes three reasons in its own words: bobbers "keep your bait where the fish are biting, keep bait off the bottom, and they tell you when you're getting a bite or strike by bobbing up and down." South Carolina DNR: bobbers "Keep your bait at the depth where the fish are" and "Serve as a strike indicator, letting you know when you're getting a bite by bobbing down in a quick jerky motion."
Why it matters: without a float, a bite can be a small tick on the line that is easy to miss. With one, the bobber going under is the signal NY DEC tells beginners to watch: "If it starts to go under the water, a fish is biting."
Fixed or slip. North Dakota: "There are slip and fixed bobbers." "Slip bobbers allow line to pass through it until it hits a 'bobber stop' (a small colored knot on your line) and bead – this is ideal when fishing in depths where you want your bait to be > 4' deep." North Dakota: "Fixed bobbers are clipped on the line and remain in place, they are perfect when you only need to put the bait a few feet down." Our summary: use a fixed (clipped) bobber when a set depth you can still cast is enough; use a slip bobber, with a stop and a bead, when you want the bait deeper than about four feet (North Dakota's threshold) without clipping a large float a long way up the line.
Texas A&M: "Most bobbers are spring-loaded and attach to your fishing line with a clip. Some are tied directly to your line or allow the line to slip entirely through for slip-cork fishing."
How small. NY DEC: "Use the smallest size bobber that you can easily see and that holds your bait without sinking. The smaller the bobber, the less resistance a fish will feel and the more likely it will hold onto the bait. Slide the bobber up or down the line to set the bait depth." NY DEC's chapter 2 of the full freshwater guide makes the same point: "The smaller the bobber, the more likely it is for the fish to hold the bait."

Swivels and snaps — what they are and when to use one
North Dakota: swivels "Help you to connect different components of a fishing rig together." University of Missouri Extension, in its 4-H Types of Tackle (fetched November 13, 2026 PT): a snap/swivel is a "Device that permit[s] one part of the tackle to rotate or spin without causing the line to twist. These allow an angler to change lures and other terminal tackle quickly and without cutting and re-tying the line to the lure." (The PDF's subject-verb is "Devices that permit"; we keep the agency's wording when we quote.)
Why it matters — the two jobs, separately: a barrel (or similar) swivel's job is to let one side turn so the line is less likely to twist (Missouri). A snap on a swivel's job is to open and close so you can change a lure without cutting and retying (Missouri). You do not need a snap on every rig. On the three simple bait rigs below, a barrel swivel is the connector in the sliding-sinker setup; a snap is useful when you are swapping lures. For line-twist more generally, see How to Choose Fishing Line and How to Choose a Fishing Reel.
Three simple rigs
These are three ways to put the pieces together. They are not the only rigs, and they are not an official ranking. Tie the hook with a knot from Essential Knots. This page does not name or teach knots.
A. Bobber-and-bait — NY DEC's beginner rig. NY DEC: "This is the best rig for beginners because the bobber lets you know when a fish takes the bait. You can use this rig with all types of live bait. A split-shot sinker is optional and should only be used if necessary to improve casting or keep your bait down." South Carolina DNR, on where to clip the bobber: "Placing the bobber two feet from the end of your line is a good place to start after your hook and sinker or split-shot have been attached. The key to the bobber rig is to make sure after you cast, your line is tight so that fish biting at your bait will be noticeable." "Two feet" is South Carolina's starting place, not a rule we apply to every depth; NY DEC says to "Slide the bobber up or down the line to set the bait depth."
The job: hold the bait off the bottom at a depth you choose, and make the bite visible. Start at South Carolina's two feet if you have no better depth, then slide the bobber.
B. Split-shot bottom rig — South Carolina DNR. "Another easy-to-use rig is a bottom or standard rig. For this rig, just tie on a hook, attach some live bait and enough split shot to sink it to the bottom. Hold your line tight as you would if you were fishing a bobber rig, but be careful not to move it. Let the fish come to your bait. If you don't get a bite after 15 minutes, then reel in and cast again in a new spot."
The job: put bait on the bottom and wait, with only enough shot to get it there. The "15 minutes, then a new spot" is South Carolina's advice, credited to South Carolina only.
C. Sliding sinker — two agencies, two scopes, not one merged rig. A sliding (egg or similar) sinker can be threaded on the main line so the line runs through it.
- Pennsylvania Fish and Boat Commission, on a catfish page, about a sliding sinker rig: "This is a popular rig for catfish. It allows catfish to take the bait without feeling the weight of the sinker." That sentence is about catfish, and we leave it there.
- Vermont Fish & Wildlife, on its Sliding Sinker Rig page (a different page from Vermont's Carolina-rig page; we do not draw a Carolina rig): "The rig typically features a non-fixed weight – of any kind or size - that is threaded on to the main fishing line before the line is tied to one end of a barrel swivel. A section of leader material is tied to the other side of the swivel, and to the leader material a baited hook or lure of choice is tied." Vermont says this setup is "one of the most popular and adaptable setups for live bait fishing," and lists "Primarily walleye, catfish, and trout, though other species such as bass, perch and different types of panfish may be caught." Vermont also says, as a "general rule of thumb, your weight selection should match both the depth you are fishing as well as the type of bottom present."
The job, in our summary of those two descriptions: the sinker can rest on the bottom while the line slides through it, so a fish can move the bait without first moving the weight (Pennsylvania, for catfish). Build it the way Vermont describes: sinker on the main line, then a barrel swivel, then a leader and a hook. For what a leader is, and for fluorocarbon as a leader material, see How to Choose Fishing Line. We do not treat Pennsylvania's catfish sentence and Vermont's multi-species sliding-sinker page as one source, and we do not name or illustrate a Carolina rig on this page.

A short decision path (our summary)
This table is our plain-English path through the agency advice above. It is not an official chart.
| If you want… | Start with… | Because… |
|---|---|---|
| To see the bite, and to hold bait off the bottom | A bobber-and-bait rig; #6 or #8 hook for panfish and trout (NY DEC); optional split shot (NY DEC) | NY DEC calls this "the best rig for beginners." Size the bobber as the smallest you can see that still floats the bait (NY DEC). |
| Bait on the bottom, no float | South Carolina's bottom rig: hook, bait, "enough split shot to sink it to the bottom." After 15 minutes with no bite, a new spot (SC DNR). | The job is to reach the bottom with only enough weight to do that. |
| A fish to take bait without first moving a weight | A sliding sinker in front of a barrel swivel and a leader (Vermont's construction); Pennsylvania describes this, for catfish, as allowing the fish to take the bait "without feeling the weight of the sinker." | Two agencies, two scopes — do not treat them as one rule. |
| A hook size when you are unsure | The smaller size (AGFC); NY DEC's #6 or #8 for panfish and trout; AGFC's species ranges if you are targeting those fish. | "When in doubt, choose the smaller size hook to ensure the fish can take it into its mouth" (AGFC). |
| Weight in a river | North Dakota's no-roll sinker, "flat and less likely to roll in the current." | Shape is part of how the sinker does its job. |
| Lead rules | Your state's current regulations, not this page's examples alone. | Rules differ (sale vs use, cutoffs, inland vs other waters). Fishing by State. |
Common questions
What is terminal tackle? South Carolina DNR groups "Basic Fishing Tackle or Terminal Tackle" as hooks, sinkers, bobbers (corks or floats), and snap swivels. Our plain-English explanation: it is the hardware at the end of the line.
What hook size should a beginner use? It depends on the fish. NY DEC: "For panfish and trout, use a number #6 or #8 hook." AGFC publishes its own ranges for bream/bluegills (no. 4 to no. 8), crappie (no. 2 to no. 6), bass (no. 2 to 4/0), and catfish (no. 1 to 6/0, depending on the size of the fish). AGFC: "When in doubt, choose the smaller size hook to ensure the fish can take it into its mouth." There is no single official size for every first trip.
How do hook numbers work? Below size 1, a larger number is a smaller hook (Arkansas, South Carolina, North Dakota). Sizes with a "/0" ("aught") get larger as the first number gets larger (Arkansas; North Dakota; South Carolina). We do not publish a conversion into inches.
Do I need a sinker on a bobber rig? Not always. NY DEC: a split-shot "is optional and should only be used if necessary to improve casting or keep your bait down."
How far above the hook should the sinker be? Agencies differ. Texas A&M: 4 to 8 inches "in many cases." USFWS: 6 to 12 inches. We do not pick one official number.
Is lead tackle allowed where I fish? It depends on your state and water, and on whether the rule is about sale, use, or both. The examples on this page — New York (sale of lead sinkers, including split shot, one-half ounce or less, per DEC and Environmental Conservation Law § 11-0308), Maine (use and sale, Title 12, §12664(2)(A-2) for use and §12663-B for sale, with Maine's own size and painted-jig rules, use on inland waters), Massachusetts (use of lead sinkers, weights, and jigs less than 1 ounce in inland waters, 321 CMR 4.01(4)(i)), Vermont (sale, offer for sale, or use of a lead sinker as Vermont defines it, one-half ounce or less, 10 V.S.A. § 4615 and § 4606(g)), and Wisconsin (voluntary lead-free options, not a ban) — are not a complete list. Check current regulations. Fishing by State.
What is a slip bobber for? North Dakota: a slip bobber is "ideal when fishing in depths where you want your bait to be > 4' deep." A fixed bobber "clipped on the line and remain[s] in place."
Which of the three rigs should I start with? NY DEC calls the bobber-and-bait rig "the best rig for beginners because the bobber lets you know when a fish takes the bait." South Carolina DNR also describes a simple bottom rig. There is no official single winner for every water.
Keep going
- Choose the rod: How to Choose a Fishing Rod.
- Choose the reel: How to Choose a Fishing Reel.
- Choose a matched set: How to Choose a Rod and Reel Combo.
- Choose the line, and when to use a leader: How to Choose Fishing Line.
- Tie the hook on: Essential Knots.
- A single matched starter setup: Your First Rod, Reel & Line.
- The tools that go in the bag: How to Choose Essential Tools.
- Permission and rules: Fishing by State. California readers can also use our license guide.
- Back to Start Here or the Guides hub.
Practice a bobber rig and a simple bottom rig, then record the setup in the Catch Log. Our free Water & Light chart helps you choose when and where to go next. The DÉJÀ VU™ First Cast Kit is on the way. Join the waitlist to hear first.
Always check current regulations for your state and water. Rules change, and some waters have special tackle or bait rules, including rules on lead sinkers and jigs. Fishing by State. Source URLs fetched or WebFetched November 13, 2026 PT.
Sources
- South Carolina DNR, A Beginner's Guide to Fishing — https://www.dnr.sc.gov/fish/pdf/fishingguide1.pdf
- NY DEC, I FISH NY freshwater basics — https://extapps.dec.ny.gov/docs/fish_marine_pdf/ifnybasics.pdf
- NY DEC, I FISH NY Beginners' Guide to Freshwater Fishing, Ch. 2 — https://extapps.dec.ny.gov/docs/fish_marine_pdf/gsfishing2.pdf
- NY DEC, Being a Responsible Angler — https://dec.ny.gov/things-to-do/freshwater-fishing/learn-to-fish/being-a-responsible-angler
- North Dakota Game and Fish, Open-Water Tackle — https://gf.nd.gov/fishing/equipment/open-water/tackle
- Arkansas Game and Fish Commission, Getting to the Point on Fishing Hooks — https://www.agfc.com/news/getting-to-the-point-on-fishing-hooks/
- Louisiana Department of Wildlife and Fisheries, Get Out and Fish — https://www.wlf.louisiana.gov/page/get-out-and-fish
- Texas A&M AgriLife Extension, Fish Texas: A Basic Guide for the Beginning Angler (tackle) — https://extension.rwfm.tamu.edu/wp-content/uploads/sites/8/2019/02/Fish-Texas-Basic-Guide-Tackle.pdf
- U.S. Fish and Wildlife Service, A Guide to Fishing for the First Time — https://www.fws.gov/story/guide-fishing-first-time
- Pennsylvania Fish and Boat Commission, Channel catfish / stink-bait recipes (sliding sinker rig) — https://www.pa.gov/agencies/fishandboat/fishing/all-about-fish/catch-pa-fish/channel-catfish/stink-bait-recipes
- Vermont Fish & Wildlife, Bottom Lures — Sliding Sinker Rig — https://www.vtfishandwildlife.com/fish/fishing-opportunities/fishing-basics/common-lures-and-rigs/bottom-lures-sliding-sinker-rig
- Vermont Fish & Wildlife, 2026 Fishing Guide & Regulations — https://www.vtfishandwildlife.com/sites/fishandwildlife/files/documents/Learn%20More/Library/REPORTS%20AND%20DOCUMENTS/archived-law-digests/2026-fish-regulations.pdf
- University of Missouri Extension, Types of Tackle — https://extension.missouri.edu/media/wysiwyg/Extensiondata/Pro/4h/Docs/Projects/OutdoorsNature/Sportfishing/TypesOfTackle.pdf
- Maine Department of Inland Fisheries and Wildlife, Use of Lead Fishing Tackle on Inland Waters — https://www.maine.gov/ifw/fishing-boating/fishing/lead-fishing-tackle.html
- Maine Legislature, Title 12, §12664(2)(A-2) — https://legislature.maine.gov/statutes/12/title12sec12664.html
- MassWildlife, Freshwater fishing regulations — https://www.mass.gov/info-details/freshwater-fishing-regulations
- MassWildlife, Stocked trout: How to catch, prepare, and cook — https://www.mass.gov/info-details/stocked-trout-how-to-catch-prepare-and-cook
- MassWildlife, 10 Tips for Taking Kids Fishing — https://www.mass.gov/info-details/10-tips-for-taking-kids-fishing
- Wisconsin DNR, Fishing & Hunting Lead-Free — https://dnr.wisconsin.gov/topic/Hunt/FishingHuntingLeadFree
- Texas Parks and Wildlife, Catch & Release Tips — https://tpwd.texas.gov/regulations/outdoor-annual/fishing/catch-release-tips


